Prism Surfboards
Prism Surfboards is an SARL in Loire-Atlantique, registered with the Nantes RCS under number 790 586 903, with its headquarters in Sorinières, an hour from our store (source: legal notices of prism-surfboards.com, consulted on 24/08/2026). The shapes are chosen and developed in France and tested in the brand's workshop. The boards are then shaped and laminated in its factory in Asia. The factory applies its methods. Prism states this, and we repeat it as is. What structures the range is the construction: EPS Epoxy everywhere, from beginner foam to longboard.
Prism Beginner Surfing
Three steps, in the order you actually take them
Beginner Starter Series Pack: high-density foam board, semi-flexible FCS II fins, leash, and sock bag. Everything is included, even the soft fins that prevent injuries during the first few weeks. This is the only product in the range that is not EPS Epoxy, and that's normal.
Evolutive Epoxy FCS 2: the board after the foam. Simplified paddling, real handling. It covers small summer waves and holds up to about 1.50 m.
Mini-Malibu Epoxy FCS 2, in 8'0: flotation and handling. It suits beginners, but an experienced surfer will gladly take it out in small waves.
The most common mistake at this stage is switching to a shortboard too quickly. A board that is too small won't help you progress; it will make you struggle.
View Prism beginner boards ↓Prism Progresser
Five shapes, all in EPS Epoxy
The Shortboard is the most responsive board in the range, designed for tight turns and aggressive maneuvers. It demands a wave with a steep face.
The Fish Epoxy features a generous outline and a pronounced rocker. It is easy to generate speed in soft waves. On the Atlantic coast, this is often the most useful board you'll own all year.
Egg Epoxy FCS 2: rounded outline, stability, and fluid transitions between turns. Gentle to medium waves.
Mid Length Epoxy FCS 2: elongated shape and rounded nose. It combines stability and handling and goes from small lines to hollower waves. It's the most versatile in the range.
Longboard Epoxy: glide and stability, efficient paddling. It allows for more frequent wave catching. This is the board for days when others stay on the beach.
The range shares a common construction, as detailed by Prism: a high-density EPS core with a central reinforcement stringer, epoxy resin, biaxial fiberglass in 6 and 4 Oz, an additional protective layer on the rear two-thirds of the deck where your feet press, and fiber reinforcements around the fin box. Lamination is done under vacuum with excess resin drainage in a climate-controlled room. Too much resin makes the board heavier and more brittle.
See Prism boards ↓Which Prism to choose
The shortcut we take in the shop
I've never surfed
The Beginner Starter Series Pack. This foam board comes with semi-soft fins, a leash, and a bag. You won't need to buy anything else for several months.
I'm riding foamies, I want to move to hardboards
The Evolutive Epoxy. This is the perfect board for this stage: still easy to paddle, yet lively enough to learn how to turn.
I want volume and stability
The Mini-Malibu 8'0. It's very forgiving and paddles great, which means more waves caught per session.
My waves are small and weak
The Fish Epoxy. With its generous outline and pronounced rocker, it keeps moving where a shortboard would stop.
I want a single versatile board
The Mid Length. It excels in everything from small lines to hollower waves, without compromising performance in either.
I'm already an advanced surfer.
Go for the Shortboard if the waves are worthy. Otherwise, the Egg is more forgiving and offers smoother transitions.
I want to longboard
The Longboard Epoxy is the most expensive board in the range, and it's the only one that truly lets you walk the nose.
My board lives in the trunk.
Any Prism board. That's the beauty of EPS Epoxy, reinforced here with an additional protective layer on the back two-thirds of the deck.
Our most frequently asked questions.
Short answers, no beating around the bush.
EPS Epoxy or polyurethane: what's the difference?
EPS Epoxy is lighter, more buoyant, and more resistant to dings. Polyurethane offers a more cushioned ride feel and is easier for any shaper to repair. For your first board or a travel board, EPS Epoxy is the pragmatic choice.
How long should you stay on a foam board?
Stay on a foam board until you're catching unbroken waves and starting to turn. Switching to a hardboard too early can cost you an entire season. It's not about pride; it's about maximizing your wave count.
Evolutive or Mini-Malibu?
The Mini-Malibu 8'0 has more volume and paddles better, while the Evolutive is shorter and livelier. If you're on the fence, go for the Mini-Malibu: it always holds its resale value and will be your go-to board for small conditions for years to come.
Fish or Egg?
Same price. The Fish accelerates faster in soft waves thanks to its generous outline. The Egg is rounder and more fluid in transitions. Choose the Fish for speed, the Egg for comfort.
What is the FCS 2 system?
This is the most common fin box standard today. Fins install and remove without screws, simply by clipping them in. Almost the entire Prism range uses it. This simplifies fin changes and transport.
Are the boards made in France?
No, and Prism doesn't claim they are. The shapes are chosen, developed, and tested in France, at the brand's workshop in Les Sorinières. The boards are shaped and laminated in their Asian factory. The factory replicates Prism's manufacturing methods. It's a French brand, not French production, and that distinction is worth making.
The full range Prism Surfboards
The complete range, not a selection. The counters follow the published stock.
Products Prism Surfboards
Prism Mid Length Epoxy FCS 2
Prism Egg Epoxy FCS 2
Prism Fish Epoxy 2025
Prism Mini-Malibu Epoxy FCS 2
Your Prism Surfboards Dealer in Pornichet, Bay of La Baule
GlissEvolution
2c Avenue du Gulf Stream · 44380 Pornichet
Tue - Sat, 10am-1pm / 3pm-7pm
📞 09 62 64 74 77 · ✉️ info@glissevolution.com
Prism Surfboards: Frequently Asked Questions
Everything you need to know before buying
What is EPS Epoxy construction?
EPS Epoxy construction uses an expanded polystyrene blank laminated with epoxy resin. This differs from traditional polyurethane and polyester resin. The result is a lighter, more buoyant board. It is significantly more resistant to handling impacts. The entire Prism hardboard range uses this construction, built on a high density core.
EPS Epoxy or Polyurethane?
EPS Epoxy offers advantages in weight, buoyancy, and resistance. Polyurethane provides a more damped ride feel in chop and can be repaired by any shaper. For a first board, a travel board, or one stored in a garage, EPS Epoxy is the pragmatic choice.
What's in the Beginner Starter Series Pack?
This pack includes a high-density foam board, semi-flexible FCS II fins, a leash, and a sock bag. The semi-flexible fins are a crucial detail. They prevent cuts during those first few weeks on the water. Prism designed and tested this pack in France.
How long should you ride a foam board?
Stay on a foam board until you can catch unbroken waves and start making turns. Switching to a hardboard too soon often leads to an entire season of frustration. It's not about your perceived skill level; it's about the number of waves you've ridden.
Which board comes after foam?
Choose the Evolutive Epoxy FCS 2, or go for the Mini-Malibu Epoxy 8'0 if you want more volume to catch more waves. The Evolutive is perfect for small summer waves up to about 1.50 m.
Evolutive or Mini-Malibu?
The Mini-Malibu offers more volume and paddles better, while the Evolutive is shorter and livelier. If you're on the fence, grab the Mini-Malibu; it stays useful even as your skills improve, especially in smaller conditions.
Fish or Egg?
Both are the same price. The Fish, with its generous outline and pronounced rocker, accelerates harder in soft waves. The rounder Egg is more stable and fluid through your transitions. Pick the Fish for speed, or the Egg for comfort.
What's the most versatile board in the range?
The Mid Length Epoxy FCS 2 features an elongated shape and a rounded nose. This board combines stability and handling. It is perfect for everything from small lines to hollower waves.
Who is the Prism Longboard for?
This board is for those days with small, gentle waves, and for riders who prioritize style over tight maneuvers. Its efficient paddling means more frequent wave catching. This is the most expensive board in the Prism catalog.
What is the FCS 2 system?
This is the most common fin box standard today. Fins clip in without screws. Most Prism boards use it. This simplifies fin changes and allows for disassembly for transport.
Which board volume should you choose?
Volume is determined by your weight, skill level, and the type of wave, in that order. This parameter is crucial for a successful board purchase, even more so than the model. Call us or visit the shop; the calculation takes five minutes.
Can an EPS Epoxy board be repaired?
Yes, but you must use epoxy resin, not polyester. Polyester attacks the EPS blank. This is important to know before entrusting the board to someone or buying a repair kit.
Is Prism a French brand?
Yes. Prism Surfboards is a SARL registered with the RCS de Nantes under number 790 586 903. Its headquarters are in building C, L'Endruère, 44840 Les Sorinières, in Loire-Atlantique (source: legal notices of prism-surfboards.com, consulted on 24/08/2026). This is the same department as our shop.
Where are the boards made?
The shapes are chosen, developed, and tested in France, in the brand's workshop. The boards are then shaped and laminated in Prism's factory in Asia. This factory applies its manufacturing methods. The brand itself states this. A French brand does not mean French production, and it's better to know this before buying than to discover it afterward.
How exactly are the boards constructed?
Prism details its technical choices: a high density EPS core with a central reinforcement stringer, epoxy resin, biaxial 6 and 4 Oz fiberglass, an additional protective layer on the rear two-thirds of the deck for the foot placement area, and fiber reinforcements around the fin box. The lamination is done under vacuum with excess resin drainage, in a climate-controlled room. Excess resin makes the board heavier and more brittle.
Are the fins included?
Yes, a thruster setup with FCS fins is included on the surf range. You don't need to add anything for your first session, unlike many boards at this price point.
Can I see the boards in Pornichet?
Absolutely! Come visit us at 2c Avenue du Gulf Stream, Tuesday through Saturday. When you're looking at our beginner and intermediate boards, seeing an evolutive, a mini-malibu, and a mid-length side-by-side is the best way to truly understand the differences.