Data sheet updated in November 2026
The Cabrinha Union Carbon Mast 2026 is the carbon mast for the Union foil system. It features pre-preg high modulus carbon, a 16mm profile, and a three-screw Union connection. Cabrinha reports significant stiffness improvements in flex tests compared to previous generations, along with low drag. The Union connection reduces the fuselage section by 15% compared to the Fusion system, according to Cabrinha. It comes in two lengths: 78 cm for prone and downwind, and 84 cm for freestyle, freeride, and wave riding.
KEY INFORMATION
CABRINHA UNION CARBON MAST 2026 - High Modulus Carbon Foil Mast
What we like
- 16mm Profile: This profile prioritizes stiffness while remaining thin, measuring 2mm thicker than the Apex.
- Monobloc Construction: Cabrinha states that the monobloc construction reduces drag and transmits energy more efficiently, resulting in more glide and higher top speeds.
- Pre-preg Carbon: Unidirectional pre-preg high modulus carbon provides stiffness without adding unnecessary weight to the mast.
- Union Connection: Three screws and a proprietary SS316 insert keep the fuselage perfectly aligned under load.
- Ventilation Resistance: The design is engineered to maintain flow and control during maneuvers, with a widened upper section for enhanced stiffness.
- Ready to Assemble: A bag, board screw set, and Torx T40 tool are included with the mast.
Use
Prone • Downwind • Wingfoil • Freeride • Waves
Available sizes
Included / Not included
✓ Included: Bag, Board and Fuselage Screw Set, Torx T40 Tool
✗ Not included: Union-compatible Front Wing, Union stabilizer with integrated fuselage, Foil board
DETAILED DESCRIPTION
The Union System Carbon Mast
The Union Carbon is a high-modulus carbon mast with a 16 mm profile. Cabrinha reports significantly higher stiffness than previous generations in flex tests, along with low drag. This mast forms the foundation of the Union system: it's stiff and direct, without aiming for the extreme thinness of the Apex. Cabrinha's notes rate it 90% for stiffness and efficiency, and 85% for speed and glide.
78 or 84 cm?
Cabrinha designed the 78 cm mast for prone and downwind purists, and also recommends it for surf foil and wingfoil. The 84 cm mast targets freestyle and freeride, and it is also suitable for waves. The brand advises it for wingfoil, tow, and kitefoil. A shorter mast is more forgiving closer to the surface, while a longer mast provides more clearance in chop and during aggressive turns.
The Union connection
The Union fuselage features a 15% reduced section compared to the Fusion system, according to Cabrinha. It attaches with three screws to a proprietary SS316 insert, which keeps the fuselage aligned under load. This mast accommodates Union stabilizers with integrated fuselage, the adjustable Tweaker fuselage, and your Fusion wings via the Union to Fusion adapter.
Union Carbon or Apex?
The Apex slims down to 14 mm thanks to ultra-high modulus carbon, focusing on torsional stiffness and speed. The Union Carbon maintains a 16 mm profile. In Cabrinha's notes, both are equally stiff. The Apex gains an advantage in speed and glide, as well as efficiency. For most riders, the Union Carbon is the more rational choice.
SIZE GUIDE
| Length | Recommended uses (according to Cabrinha) | Construction |
|---|---|---|
| 78 cm | Surf foil, downwind, wingfoil | High-modulus carbon, 16 mm profile |
| 84 cm | Wingfoil, tow, kitefoil | High-modulus carbon, 16 mm profile |
TECHNICAL SPECIFICATIONS
| Specifications | |
|---|---|
| Type | Foil mast |
| Material | Unidirectional pre-preg high-modulus carbon |
| Construction | Monobloc, tapered up high section |
| Profile thickness | 16 mm |
| Fuselage attachment | Union connection, three screws, integrated SS316 insert |
| Lengths | 78 and 84 cm |
| Compatibility | Union stabilizers with integrated fuselage, Tweaker fuselage, and Fusion Front Wings via the Union to Fusion adapter. |
| Delivered with | Bag, board screw set (4 M8 x 30 mm screws and 4 T-nuts), 2 M8 x 45 mm screws, 1 M8 x 25 mm screw, Torx T40 tool |
| Manufacturer reference | K6FSCMAST |
FAQ - CABRINHA UNION CARBON MAST 2026
This mast is for riders who want a stiff, direct carbon mast for prone, downwind, wingfoil, freeride, or wave riding. If you're new to foil, the Union Alloy is a more logical entry point.
According to Cabrinha, the 78 cm is for prone and downwind, and the 84 cm is for freestyle, freeride, and wave. The brand recommends both for wingfoil: choose based on your spot's depth and the clearance you want in chop.
You get a bag, board mounting screws (4 M8 x 30 mm screws and 4 T-nuts), 2 M8 x 45 mm screws, 1 M8 x 25 mm screw, and a T40 Torx tool. The Front Wing and stabilizer are sold separately.
Rinse the mast and screw set with fresh water after each sea session. Disassemble regularly to prevent screws from seizing. Store it dry in its bag. Check the tightness before riding.
For customer service and after-sales support from Pornichet. This Cabrinha product ships from the supplier's stock. The availability and delivery time shown on the product page are updated twice daily.
▶ Need advice?
GlissEvolution, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique)
09 62 64 74 77 | WhatsApp: 07 83 28 39 94, Tuesday to Saturday, 10 am-1 pm / 3 pm-7 pm
Customer reviews
Loading reviews...






