Data sheet updated in October 2026
The Sabfoil Board Footstraps MA001 kit includes three footstraps that Sabfoil sells for its foil boards, with the screw set included. You get three footstraps, six M5x25 self-tapping screws, and six washers. This is everything you need to set up your board with two front footstraps and one rear footstrap.
KEY INFORMATION
SABFOIL BOARD FOOTSTRAPS MA001 (X3) - Kit of three footstraps for foil boards
What we like
- Three footstraps: Two for the front and one for the rear, which is the most common setup for both wing and kitefoil.
- Screw set included: This kit comes with six M5 x 25 mm self-tapping screws and six washers.
- Original part: This is the genuine Sabfoil product, not an aftermarket strap.
- Large washers: At Ø20 mm, these washers help distribute the pressure evenly across the strap.
- Adjustable: You can adjust these footstraps to fit your foot width.
Available sizes
Included / Not included
✓ Included: 3 footstraps, screw set and washers
✗ Not included: Board
DETAILED DESCRIPTION
What's in the box
Sabfoil provides three footstraps, six M5x25 mm self-tapping screws, and six Ø5.3 x Ø20 x 1.2 mm washers. With two screws per strap, you won't need to buy anything extra.
Which boards is this for?
These footstraps are primarily designed for Sabfoil boards, but they will also fit any foil board with M5 inserts or that uses self-tapping screws. If you're unsure about your board's inserts, bring it by the shop and we'll check it out together.
Two in front, one in back
Three footstraps is the most common setup for wing and kitefoil: two in a V-shape at the front, and one at the back. You can also choose to mount just two and keep the third as a spare.
During assembly
For self-tapping screws, always tighten them by hand, not with a power drill, to prevent damage to your inserts. The wide washers are there to stop the screw from pulling through the strap.
TECHNICAL SPECIFICATIONS
| Specifications | |
|---|---|
| Type | Footstrap kit for foil board |
| Content | 3 straps |
| Screws | 6 M5 x 25 mm self-tapping screws |
| Washers | 6, Ø5.3 x Ø20 x 1.2 mm |
| Supplier reference | MA001 |
FAQ - SABFOIL BOARD FOOTSTRAPS MA001 (X3)
According to Sabfoil, you get three footstraps, along with six M5x25 screws and six washers.
Yes, if your board's inserts are compatible with M5 self-tapping screws. Feel free to bring your board in so we can verify it for you.
Yes, you can adjust the foot width using the Velcro on each footstrap.
No, a screwdriver is all you need. Remember to tighten them by hand to protect your inserts.
GlissEvolution is your go-to kitesurf, wing, foil, and Surf shop in Pornichet, proudly serving riders since 2005. If you bring your board by, we can even mount the footstraps for you on the spot. Got a question? Just give us a call!
▶ Need advice?
GlissEvolution, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique)
09 62 64 74 77 | WhatsApp: 07 83 28 39 94, Tuesday to Saturday, 10am-1pm / 3pm-7pm
Test center available by appointment
Customer reviews
Loading reviews...