Tick an accessory: it goes into the cart with this product.
Datasheet updated August 2026
The JAM with TITAN 1 connection remains a staple in the F-ONE catalog. It features the same front wing, the same 10 aspect ratio, and the same dock start and pump foil purpose as the 2026 version. The only difference is the mast interface, which stays TITAN 1.
The TITAN 1 connection is the first generation, which F-ONE simply calls TITAN in their documentation. It mounts with the original M6 screw set, using three M6-32 screws and two M6-25 screws. In contrast, the 2026 TITAN 2 tightens with two M8 screws. The two generations are not interchangeable, and F-ONE has not provided an adapter.
KEY INFORMATION
What we like
- Built for dock start and pump foil, it only takes a few pumps to get out of the water.
- Sustained glide: stop pumping for a few seconds, and the foil keeps moving forward.
- Early take-offs: the surface area and aspect ratio allow for early lift, even without high entry speed.
- Efficient at low speeds: perfect for wing foiling in light wind and marginal downwind conditions.
- Refined wingtips: the aspect ratio of 10 doesn't prevent it from turning effectively.
- Monobloc HM carbon structure: the front wing and fuselage are molded in one piece, eliminating any unwanted play.
Available sizes
Disciplines
Dock start, pump foil, light wind wing foiling, SUP downwind.
Required Level
Beginner to expert in pump foil.
Included
JAM HM Carbon Front Wing, EVA bag, screw set (3 M6-32 screws and 2 M6-25 conical head screws) and Torx key, user guide
MANUFACTURER PROGRAM
F-ONE JAM HM CARBON (TITAN 1)
| Dock start | 100% | |
| Pumping | 100% | |
| Carving | 20% | |
| Roll | 10% |
Gauges published by F-ONE on the JAM product page, recorded on August 20, 2026.
DETAILED DESCRIPTION
Infinite glide, minimal drag.
Just a few pumps on the JAM are enough to get out of the water and keep going. Stop pumping for a few seconds, and it continues its glide. The front wing's design, its angle of attack, and its profile reduce induced drag. This results in a long-lasting glide and minimal effort for re-acceleration. The wingtips have been refined to maintain handling despite an aspect ratio of 10. As a result, the JAM is not just a pumping machine; it remains enjoyable to ride.
What it can do besides pumping.
With early take-off and good speed, the JAM navigates smoothly and precisely. Its high aspect ratio and efficiency at low speeds make it a solid choice for wing foil and downwind in marginal conditions. It also picks up speed when asked, which opens the door to light wind wing sessions and some mellow waves. This is the foil for sessions where there's almost nothing.
High Modulus Carbon and Monobloc Structure.
The JAM is molded from pre-preg carbon. F-ONE announces a high modulus fiber 1.5 times stiffer than standard carbon, precisely dosed to maintain comfort. The Monobloc structure goes further: the front wing and fuselage are molded in a single piece, eliminating the connection between the two and with it the micro-movements that consume pumping energy. The fuselage fibers extend into the front wing, lightening the entire assembly and stiffening the most loaded connection of the foil.
Which size to choose.
The 1400 cm² targets experienced dock start and pumping riders, beginners in SUP downwind, light wind wing, and micro-swell surf foil.
The 1600 cm² is the right compromise for wing foil and SUP foil in marginal conditions, and for learning SUP downwind.
The 1900 cm² is for dock start, flat water pumping, and heavier riders.
TECHNICAL SPECIFICATIONS
| Surface | AR | Wingspan | Weight | Cstr° | Stab |
|---|---|---|---|---|---|
| 1400 | 10.3 | 120 cm | 1.83 kg | HM Carbon | Pumping 200 XXS |
| 1600 | 10.2 | 128 cm | 2.03 kg | HM Carbon | Pumping 200 XXS |
| 1900 | 10.5 | 140 cm | 2.42 kg | HM Carbon | Pumping 200 XXS |
Weights and wingspans are published by F-ONE, recorded on August 20, 2026. The stated weight refers to the front wing only.
FAQ, F-ONE JAM HM CARBON (TITAN 1)
The wing profile, aspect ratio, and program are the same. The mast connection changes: TITAN 1 here, TITAN 2 on the 2026. The TITAN 1 tightens with three M6-32 screws and two M6-25 screws. The TITAN 2 uses two M8 screws. The announced weights also differ by a few tens of grams.
F-ONE masts with TITAN 1 connection, both aluminum and carbon: F-ONE Aluminum Mast, Carbon Mast 16, and Carbon HM Mast 14. The T2 masts released in 2026 are not compatible. F-ONE has not provided an adapter. If you are unsure about your mast, send us a photo of the base.
F-ONE recommends the Monobloc Tail Pumping XXS 200 for all three sizes.
The 1400 is for experienced pumpers and light wind winging. The 1600 is for SUP downwind and marginal conditions. The 1900 is for flat water dock start and heavier riders.
No. This product code refers to the Front Wing only.
If your gear is already TITAN 1, stick with TITAN 1. You can keep your mast. If you are starting fresh or upgrading to T2, choose the 2026. This is the line F-ONE is developing, masts included.
Benefit from the expert advice of our specialized team and comprehensive after-sales support.
Need advice?
Oscar, Foil Expert at GlissEvolution
GlissEvolution, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique)
Tel: 09 62 64 74 77, Tuesday to Saturday, 10 am-1 pm / 3 pm-7 pm
We are an authorized F-ONE dealer. Don't hesitate to contact us with any questions about the JAM range.
To go further
Customer reviews
Loading reviews...